Get Help and Support.1-866-549-6446

Rotary Claw Vacuum Pumps

Selectorr oil-less rotary claw vacuum pumps provide high efficiency on a multitude of applications. Direct driven by Nema flange motors, these pumps are equipped with anti suck-back valves and exhaust silencers.

All models can be operated continuously with minimal maintenance required. Selectorr claws are well suited for soil remediation, medical/lab vacuum, pneumatic conveying, and packaging.

Spec Sheet
Rotary Claw Vacuum Pumps: Oil-less
MODEL C2 C3C C5C C7C C10C C15LC C15C C30
Part # (with motor) 264341 264363 264364 264365 264366 264367 264368 264345
Part # (without motor) 264341-LM 264363-LM 264364-LM 264365-LM 264366-LM 264367-LM 264368-LM 264345-LM
Motor HP 60 Hz 2 3 5 7.5 10 15 15 30
RPM 60/50 Hz 3500/2900 3500/2900 3500/2900 3500/2900 3500/2900 3500/2900 3500/2900 3500/2900
Inlet/Discharge Connections 1"/1" 1 1/2" 1 1/2" 2"/1 1/2" 2"/1 1/2" 3"/2 1/2" 3"/2 1/2" 4"*
dB(A), average 60 Hz 80 75 75 76 77 78 78 85
Approximate Weight Pump Only (lb.) 141 280 302 514 548 741 750 1730
Approximate Weight with Motor (lb.) 185 370 445 747 787 1063 1237 2135
Gear Box Oil Capacity (quarts) 0.4 0.5 0.5 1.0 1.0 2.0 2.0 3.4
Parts & Accessories more info more info more info more info more info more info more info more info
Dimensions drawing drawing drawing drawing drawing drawing drawing drawing
Manual English
ACFM @ 0" 40 70 112 197 220 283 352 670
ACFM @ 10" 36 68 111 191 213 274 352 635
ACFM @ 15" 34 66 108 186 209 265 352 615
ACFM @ 19" 33 63 106 177 205 260 350 600
ACFM @ 22" 32 62 104 174 197 251 330 580
ACFM @ 25" 30 60 100 170 189 N.A. N.A. N.A.
Ultimate Vacuum, Max, " Hg. 27" 26" 26" 25" 25" 25" 25" 26"
Ultimate Vacuum, Continuous, " Hg. 26" 25" 25" 24" 24" 24" 24" 24"
SCFM @19" Hg. 12 23 39 65 75 95 128 220
Tolerance +/- 10%
* C30 inlet and discharge ports have flanged connections.


Rotary claw vacuum pumps can operate continuously and dependably for long periods of time. Inlet filters are typically used for both vacuum and compressor applications in order to trap contaminants from entering the pumping chamber.

A claw vacuum pump consists of two rotors. The rotors turn in opposite directions, without contact, with very tight clearances. They are synchronized via a precision gear. As the claw moves over the suction connection and the axial suction channel inlet, gas is sucked into the compression chamber.

The revolving rotors move gas from the suction side to the pressure side. Then it is compressed by the reduction of the volume between the rotors until the lower rotor uncovers the discharge channel. This "internal compression" leads to high differential pressures at efficiencies of more than 60%. To remove the heat generated by the compression process, cooling air is sucked in between the compression housing and a silencing cover before leaving the pump.

Questions About Our Products?
Contact Us or Call 1-866-549-6446
Products
Industrial Vacuum & Air
Medical Gas Pipeline
Medical Devices
Legacy
Services
Industrial Air System Repair & Maintenance
Industrial Vacuum System Repair & Maintenance
Medical Gas Pipeline Preventative Maintenance
Exchange for Change Program
Custom Vacuum Pumps & Services
Troubleshooting Guides
Login
About Us
Company Profile
Applications
Contact Us
Request a Quote: vacuum & air
Request a Quote: medical gas pipeline
Squire-Cogswell
1111 Lakeside Drive, Gurnee, IL 60031 USA  |  Call 1-866-549-6446
Copyright © 2021| Legal| Terms and Conditions| Connect With Us!